How to control outdoor led lights through DMX512 lighting control system?

connect:

DMX controller--receiving decoder---LED lamps or DMX controller--LED lamps (lamps with DMX signal receiving chip)

principle:

The DMX signal is a parallel signal, and all the following receivers are connected in parallel to the output of the DMX controller.

On the outgoing line, different receiving ends are distinguished by different address codes, forming various regular changing effects.

After the DMX receiver receives the DMX signal, it converts it into an analog signal to drive the LED. PWM is the way to control the brightness of the LED.

The signal sent by the DMX controller is not processed by the receiver. Each receiver below receives the same command, but the receivers have different codes. LED lamps can be combined to create different changing effects.

DMX512 main control system is a set of LED control system used for indoor and outdoor lighting control of buildings, which can easily modify the lighting effects in the controller at any time.