loading

 CHZ Lighting -  LED Street Light Manufacturer and LED Flood Light Factory Since 2024

CHZ Lighting is a professional lighting manufacturer integrating production and sales. With more than 10 years of lighting experience, we provide our customers with high quality LED lighting products and lighting solutions. Our products include street lamps, solar street lamps, floodlights, factory lights, garden lights, tri-proof lights, panel lights and tube lamps. We have assisted customers in Europe, America, South America, Southeast Asia, Africa and other countries to successfully complete roads and highways. Parking lots, airports, terminals, factories, shopping malls, shops, squares and other lighting projects have won wide acclaim from customers. By comparing product quality, actual energy saving after use, professional and timely communication process, and after-sales service, they have recognized the advantages of our company and deepened their loyalty. Hope to provide quality services to more customers, welcome to visit our company.Subtitle Description

 

A: In the original DALI system, there is no problem using DALI-2 control device. DALI-2 is designed for backward compatibility.
A: DALI-2 is the second major version of the DALI protocol standard IEC62386, which is DALI Version 2. The upgrade of DALI-2 on the basis of DALI includes:
①. Fix the errors and shortcomings of version 1.0, such as more detailed and strict requirements for transmission timing, and remove some unused feature requirements.
②. Some new features have been added. DALI-2 significantly improves the interoperability of products from different manufacturers.
③. The test process of DALI-2 is more detai
A: Simply put, dimming requires one channel to achieve control, and color temperature also requires one channel to achieve control. At the same time, dimming and color temperature require two channels to achieve. The DT6 driver is a single address and single channel, if you need to adjust the color temperature, you need two addresses to control; the DT8 driver is a single address and dual channel, if you need to adjust the color temperature, one address can be used to control.
A: When the DALI dimming control system runs for a period of time, some DALI equipment may fail and need to be replaced:
①. If only one DALI device is replaced
DALI equipment does not have parameters such as an address, grouping, scene, etc. when it leaves the factory. The old DALI device can be simply replaced with a new one so that the system can be simply addressed. The address automatically obtained by this new DALI device is the address of the old device. However, the groups and scenes ne
A: Yes. As long as it is correctly connected to the mains, the lamps using DALI power supply do not connect to the DALI signal line, and they can also light up like ordinary lamps (the default brightness is all bright).
A: A standard DALI bus link can control 64 lights. If this number is exceeded, another DALI bus link is needed to control it.
A: A standard DALI system can carry up to 64 components with independent addresses. The maximum current provided by the DALI system is 250mA, which is a limitation of the DALI system. If a DALI system has more than 64 independent addresses or the system current is greater than 250mA, the signal will be attenuated, distorted, and cause system errors. Some components may not be able to communicate and the system will run unstable.
A: Most of the cases are caused by insufficient creepage distance or insulation level of the lamp design, which can be solved after the lamp shell is grounded.
A: The maximum transmission distance of DALI is 300 meters, which is limited by the resistance of the signal wire and other factors. It is recommended that the actual use distance be less than 300 meters as much as possible.
A: The biggest feature of DALI technology is that a single lamp has an independent address, and a single lamp or lamp group can be accurately dimmed through the DALI system. DALI system software can independently address single or multiple lamps on the same circuit or different circuits, so as to realize individual control and arbitrary grouping. Therefore, the DALI dimming system is controlled according to the DALI address and is not restricted by the loop, which brings great flexibility to th
A: DALI is the acronym for "Digital Addressable Lighting Interface", which translates as "Digital Addressable Lighting Interface". It is the internationally open lighting control communication protocol IEC62386, which specifies the digital communication control method between electronic ballasts, control units and various sensors. That is to say, DALI is a protocol specially used for lighting control. It can control each lamp individually, realize the control of brightness, color temperature, c
A:
1) Under normal circumstances, after the antenna form is fixed, the pattern is basically determined, and the antenna back lobe optimization can consider the use of a more directional antenna;

2) When designing the antenna: Keep the antenna surface away from the edge of the board as much as possible, increase the size of the board as much as possible, and spread the ground on the bottom as much as possible. Consider placing a shielding cover on the back of the module to reduce the radiatio
no data

Contact Us

Contact Person : Jolina
Tel : +86 2169898169
E-mail : Sales@chz-lighting.com

WHATSAPP :+86 159 2122 3752

Wechat: +86 159 2122 3752

SKYPE: jolina.li

Address : No.518, Xiangjiang Road,Shanghai, China

Better Touch Better Business

Contact Sales at CHZ Lighting.

Privacy policy

Copyright © 2024 Shanghai CHZ Lighting Co.,Ltd | Sitemap
Customer service
detect