This solar street light pole manufacturer has been using seamless welding machine technology for 8 years

High-quality solar street lights must be equipped with high-quality street light poles. The poles for solar street lights of Shanghai CHZ Changhui Lighting Technology Co., Ltd. are made of steel. The raw materials are international standard q235, low silicon, low carbon, high strength, and wall thickness. 5 mm, the bottom flange thickness is 16 mm, the ratio of the pole structure and the root structure is calculated according to the shape determined by the customer and the structural parameters of the manufacturer, the earthquake resistance level is 6, and the wind resistance level is 8. As early as 2012, all the street light poles produced by Changhui Lighting adopted seamless welding technology, which improved the aesthetics and stability of the street light poles. The welding seam of the solar street light pole has been tested by professional equipment, and the straightness error is 1.0. The vertical rods of this pole are of conical structure, and all octagonal cone poles are free from deformation and twisting. The roundness specification of the rod body is 1.0 mm. Surface lubrication of the rod body is common without transverse welds. The blade scratch test (25 square millimeters) shows that the plastic spray layer has strong adhesion and is not easy to fall off. Seal the uprights and wrap the top to keep moisture out. The waterproof internal leakage method is reliable. The shape and size of the light pole meet the needs of users, the appearance is harmonious, beautiful and generous, the color is uniform, and the diameter of the steel pipe is reasonable. All rod body welding processes have no leakage welding, smooth welding seams, no welding defects, passivation treatment after galvanizing, good spray adhesion, and thickness of 65 mm. Use high-quality plastic powder.