Safety precautions for led solar street lights

>

The led solar street light is an independent self-powered system. When installing the solar maintenance-free battery, it must be handled with care when placed in the control box to prevent damage to the control box; the connecting wires between the batteries must be pressed against the battery with bolts. After the output wire is connected to the battery, it is forbidden to short-circuit under any circumstances to avoid damage to the battery. When the output wire of the battery is connected to the controller in the utility pole Must pass through PVC conduit.

After completing the above steps, check the wiring of the controller to prevent short circuit, and close the door of the control box when it is normal. To install the led solar street light fixture, it is required to fix the components of each part: the solar panel is fixed on the solar panel bracket, the lamp head is fixed on the pick arm, then the bracket and pick arm are fixed to the main pole, and the connecting wire is passed to the control box (battery box). Before lifting the light pole, check whether the fasteners in each part are firm, whether the lamp head is installed correctly, and whether the light source works normally. Then, to check whether the system is working normally, loosen the connecting wire between the controller and the solar panel, the light source works normally, and the light is off after connecting the connecting wire of the solar panel; at the same time, carefully observe the changes of the indicators on the controller, so the data belongs to If it is normal, it can be lifted and installed.

When the main light pole is hoisted, pay attention to safety precautions, and the screws must be fastened well. If the sun-facing angle of the module is deviated, it needs to be adjusted upwards and its sun-facing direction is completely facing south.

Put the battery into the battery box, connect the connecting wire to the controller according to the technical requirements, connect the battery first, then the load, and then the solar panel; when wiring, be sure to pay attention to the connection between each wiring and the terminals marked on the controller. If it is wrongly connected, the positive and negative polarities cannot collide, and cannot be reversed, otherwise the controller will be damaged.

Debug again to see if the system can run normally; loosen the solar panel connection cable on the controller, the LED solar street light will turn on, connect the solar panel connection cable, and the light will be off; at the same time, carefully observe the changes of the indicators on the controller, so If the data is normal, the control box can be sealed.

Shanghai CHZ Lighting Co.,Ltd is fully committed to supplying high quality products and services.

Shanghai CHZ Lighting Co.,Ltd’s purpose is to create superior value for our customers, employees, communities and investors through the production, conversion, delivery and sale of energy and energy services.

For most children led light factory is a struggle. If that is also the case for your children, find the solution at CHZ Lighting.CHZ are your best choice.

led lighting supplier problems are nothing new, almost every one of us have to go through them at some point of our lives and some of us never get rid of them. with the development of led flood lights suppliers technology, now provides a perfect cure for that.