Introduction of garden light system and accessories

The garden light system is composed of several parts of solar cell components (including brackets), LED lamp heads, containment boxes (with controllers, batteries) and light poles; the light efficiency of solar panels reaches 127Wp/m2, which adheres to high , which is particularly beneficial to the trivial wind resistance design; the lamp head department uses 1W white LED and 1W yellow LED integrated on the printed circuit board and arranged as a dot matrix with a certain spacing as a three-dimensional light source. The tube bundle box is made of stainless steel, which is beautiful and durable; maintenance-free lead-acid batteries and charge-discharge diverters are arranged in the tube bundle box. This system uses valve-regulated sealed lead-acid battery, because it has little maintenance, so it is also called maintenance-free battery, which is not conducive to the low maintenance cost; Time control, overcharge care, over-discharge protection, reverse connection care, etc.) and resource control to achieve a high cost performance. Brief introduction to the working principle The system is simple in operation and simple in principle. The solar cell night solar panel made of the principle of photovoltaic special effect receives solar radiation energy and converts it into electrical energy output, and stores it in the battery through the charge and discharge controller. About 10lux, the open circuit voltage of solar panel is about 4.5V, the charge and discharge controller detects this voltage and acts, and the battery discharges the lamp head. After the battery has been discharged for 8.5 hours, the charge and discharge controller will act and the battery will be discharged. The main advice of the charge and discharge tube bundler is to protect the battery. Please indicate the reason for reprinting: