How to solve the failure of led solar street light

With the country's strong support for the environmental protection industry and the development of the solar street light industry, led solar street lights are becoming more and more popular, how to use solar street lights correctly is very important, install them correctly before use, and maintain them properly. Today, Chang Hui summarized some common faults and solutions of solar street lights, hoping to help you better the daily maintenance of street lights.

LED solar street lights are dark, and the street lights do not turn on. Common faults and troubleshooting are as follows:

1. All the indicator lights are off, it is possible that the battery is over-discharged, and the battery hardware is protected. You can check the indicator status during the next day. If the indicator status is not lit during the day the next day, you need to contact the manufacturer’s engineer to further analyze the cause.

2. The lamp is normally on for a period of time, but the lighting time is short. Please observe the surrounding environment, whether the solar panel is blocked, the installation angle of the solar panel, whether to adjust the angle of the maximum irradiation area of u200bu200bthe road, and whether it has been continuous recently A few days are rainy days. If none of the above problems exist, please use the universal remote control to read the setting parameters to see if it is the normal factory mode setting. The current setting may be too high or changing the control factory mode will cause the light to be on for a short time. In this case , Need to be adjusted back to the factory default mode.

Solar street lights use solar power. Except for a small part of the electricity cost in rainy days, the operation cost is almost zero. The operation of the entire system is automatically controlled, without human intervention, and almost no maintenance costs.

The service life of led solar street lights is related to the usual maintenance. At the initial stage of installation, the construction standards should be strictly followed, and the configuration should be reasonable to increase the capacity of the battery and prolong the life of the solar street lights.