How to set the switch timing of solar street lights more reasonably

How to control the switch of solar street light? At this time, the controller installed on the street lamp comes into play. According to different requirements, the street lamp can be designed to be light-controlled or time-controlled. Not only the charging and discharging time of the battery can be controlled, but the intensity of the discharge can also be controlled. In addition, due to the different environmental indicators of the installation site, it will have a considerable impact on whether the solar street light can be used for effective lighting. Researchers can also design the size of the battery according to the electricity load according to the daily lighting time of the place of use, the maximum number of days to ensure lighting, and the street light bulbs used. For example, in Shanghai, the annual average effective sunshine time is about 2.5-3 hours. If the installation site is located in a windy coastal area, the effective sunshine time is not very regular. This factor can be specially considered during installation, and continuous lighting will be used. The time exceeded the original 7-day lighting upper limit design, and achieved 15 days. This also means that as long as the continuous rainy weather does not exceed 15 days, there is no need to worry about the power outage of solar street lights. These flexible technical designs ensure the normal operation of solar street lights to the greatest extent and save energy to the greatest extent. The reasonable switching time design of solar street lights can give full play to the good functional advantages of solar street lights, increase the promotion market of solar street lights, and obtain greater social value.