How to install a lithium battery integrated solar street light?

How to install the lithium battery integrated solar street light, the following is an introduction: the installation steps of the lithium battery integrated solar street light:

The assembly of the lithium battery integrated solar street lamp is relatively simple. According to the manual, it is directly installed. The most important thing is the installation of the road. Be sure to ensure safety, error-free, etc.

Lithium battery integrated solar street light case

First, the foundation needs to be poured, and the installation place is checked to see if it is backfilled. If it is backfilled, the foundation pit should be deepened and enlarged, so as to ensure the stability of the lithium battery integrated solar street light in the later use.

Then it is the fixation of the poles of the lithium battery integrated solar street light. Before fixing, pay attention to the orientation of the battery panel of the lithium battery integrated solar street light. Generally, the inclination angle of the battery panel has been fixed before leaving the factory, but the orientation needs to be determined according to local conditions . Keep facing the south, and ensure that there are no obstructions around, which will affect the light conversion efficiency of the solar panel.

The installation of a lithium battery integrated solar street lamp battery needs to be buried deep below the frozen soil layer to maintain temperature balance and effectively improve the charging and discharging efficiency of the battery.

The last is the wiring of the lithium battery integrated solar street light, which is mainly to connect the battery and the battery panel lighting. When wiring, it is necessary to distinguish the positive and negative poles. After determining the positive and negative poles of the battery panel, light source, and battery, strictly follow the control Wiring instructions on the device.