Changhui Lighting: Description of the main technical parameters of European garden lights

1. European-style garden lights Garden lights model specifications: garden lights height 3-5 meters. 2. Technical requirements for European-style garden lights and garden lights: 1. The garden light poles should be fortified according to the earthquake resistance of 7 degrees and the wind resistance of 40 meters per second. 2. The material of the garden lamp pole body and lamp arm is steel plate, and the wall thickness of the lamp pole is greater than or equal to 3.0 mm (the net thickness of the steel plate excluding the galvanized and sprayed layer). 3. European garden lamp garden lamp pole, lamp arm, lamp The surface of the plate and all metal parts should be hot-dip galvanized and electrostatically sprayed. It is required that the galvanized layer is uniform and the thickness is not less than 65μm; after galvanizing, it should be passivated, the surface is smooth, the thickness of the spray layer is not less than 100μm, and the adhesion is above grade 2. 4. The dimensions of each part of the European-style garden light garden light pole are as shown in the figure, and the dimensions of the position of the light pole door, the installation junction box beam, the grounding end, the flange plate and other parts are shown in the attached figure. 5. The main body of the garden lamp is made of aluminum alloy high-pressure die-casting. It should have high aluminum purity, strong corrosion resistance, simple appearance, smooth lines, firm structure, surface spray or paint anti-corrosion treatment, smooth and beautiful. It requires stable quality and good adhesion, no fading or falling off. 6. The reflector of the garden lamp is made of high-purity aluminum, and the surface is oxidized and then plated with silicon dioxide. There is no obvious scratch on the surface. The light distribution is reasonable, the light efficiency is high, and the low-glare optical system. 7. The light transmittance of the lampshade of the garden lamp is more than 90%; the surface of the lampshade has no bubbles, obvious scratches and cracks. 8. The lamps and lanterns of garden lamps and lanterns are composed of an inner bulb-changing structure. The internal parts are made of fire-retardant and flame-retardant materials, and the exposed fasteners are made of stainless steel. 9. The insulation resistance value of garden lamps and lanterns is not less than 2MΩ, the internal wiring is copper core double-sheathed insulated wire, the cross-sectional area of u200bu200bthe core wire is not less than 1.5mm2, and the insulation thickness of rubber or polyvinyl chloride (PVC) insulated wires is not less than less than 0.6mm. 10. The electrical safety level of garden lamps and lanterns: Class I, the lamps should have a dedicated ground terminal. 11. Protection grade and sealing performance of garden lights: electrical cavity IP54; 12. Power factor of garden lights: more than 0.85. 13. The pole diameter of the garden lamp is hot-dip galvanized, and the surface is coated with polyester powder. The electrical door is 500mm off the ground, and the door is 600mm long and 120mm wide.