Chang Hui talks about the energy storage process of solar LED street lights

　　Solar LED street lights are mainly composed of four parts: solar cell components, light-emitting diodes, storage batteries and controllers. The solar cell module completes the conversion of solar energy, and it is stored in the battery, and then discharged for lighting at night when it is dark.

　　 In general, under the ideal light intensity, it only takes 4 hours to fully charge when it is sunny, and it can be guaranteed for more than 5 days after each charge is completed, and it can work normally for 3 consecutive days of rain or rain. In addition, Changhui solar street lamp manufacturers use the controller to design the switch of the solar street lamp to be light-controlled or time-controlled according to different requirements. Not only the time of battery charging and discharging can be controlled, but the intensity of discharge can also be controlled.

　　 Then the solar LED street light's battery panel completes the energy storage process? The main material of solar panels is silicon, and some also contain some other alloys. When solar panels are irradiated by light, they can convert light energy into electrical energy, so that current flows from one side to the other.

　　As long as the solar panel of the solar LED street light is irradiated by sunlight or light, it can generally emit electricity equivalent to 1/10 of the received light energy. In order to minimize the light reflection of the solar panel, increase the photoelectric conversion rate, and convert light energy into electric energy, a layer of film to prevent light reflection is generally covered on the solar panel to make the surface of the solar panel appear purple. . In addition, the inclination of the solar panel will also have a considerable impact on the effective daylighting of solar LED street lights.